The OB/KIT at a glance
The OB/KIT puts the hydraulic OB/85S hand pipe bender and a kit for working the ends of annealed copper pipes into one plastic case. With the same pump body, the installer bends the pipe, expands sockets, makes flares and reduces pipe ends – quickly and without a second tool.
Version A covers pipes from 10 to 22 mm, version B the inch sizes from 1/4″ to 7/8″. Each set contains the pump body, seven formers with three counterformers, two vices, seven punches, a conical punch and a flange punch.
Technical Data
| Base unit | OB/85S hydraulic pump body (000018.1) |
|---|---|
| Operations | bending, sockets, flares, reductions |
| Pipes | annealed copper 10–22 mm or 1/4″–7/8″ |
| Case | PVC case (010080) |
Versions of the OB/KIT
| Version | Article no. | Formers | Counterformers | Vices | Punches | Weight |
|---|---|---|---|---|---|---|
| A · 10–22 mm | 9100050 | 10, 12, 14, 16, 18, 20, 22 mm | 10–12, 14–17, 18–22 | 10–16, 18–22 | 10, 12, 14, 16, 18, 20, 22 mm | 9 kg / 19.8 lb |
| B · 1/4"–7/8" | 9100060 | 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8" | 10–12, 14–17, 18–22 | 1/4"–1/2", 5/8"–7/8" | 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8" | 8.8 kg / 19.4 lb |
Both versions also include a conical punch (595035) and a flange punch (595036).
Related products
Matching accessories:
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.
