CBC pressing jaws for the EUROPRESS presses
The CBC EUROPRESS 2001 with its 230 V motor and the battery-powered EUROPRESS 98/B take the same pressing jaws, which CBC lists as EP 98 jaws. The jaws are made of hardened steel, sit in the jaw head that turns through 360° and are held by a locking pin.
The profile of a jaw has to match the press fitting system, its size the pipe diameter. CBC supplies 61 jaws in the profiles G, H, HA, M, SV, TH and U from Ø 12 to 54 mm, plus a TH pressing chain for Ø 63 mm. The last table on this page shows which profile and which sizes CBC assigns to each press fitting system.
Each standard set of the two presses already contains three jaws of one profile; further sizes are available here individually. For storage, CBC offers metal cases for four jaws or for two large jaws.
Technical Data
| Suitable for | CBC EUROPRESS 2001, CBC EUROPRESS 98/B |
|---|---|
| Material | hardened steel |
| Profiles | G, H, HA, M, SV, TH, U (plus UC and C) |
| Sizes | Ø 12–54 mm; TH pressing chain Ø 63 mm |
| Storage | metal case for 4 jaws (000978) or 2 large jaws (000979) |
EUROPRESS jaws with profile G (Geberit Mepla)
| Version | Article no. |
|---|---|
| G · Ø 16 mm | 965016G |
| G · Ø 20 mm | 965020G |
| G · Ø 26 mm | 965026G |
| G · Ø 32 mm | 965032G |
| G · Ø 40 mm | 965040G |
| G · Ø 50 mm | 965050G |
EUROPRESS jaws with profile H (Valsir, Aquatechnik, Prandelli)
| Version | Article no. |
|---|---|
| H · Ø 12 mm | 965012H |
| H · Ø 14 mm | 965014H |
| H · Ø 16 mm | 965016H |
| H · Ø 17 mm | 965017H |
| H · Ø 18 mm | 965018H |
| H · Ø 20 mm | 965020H |
| H · Ø 25 mm | 965025H |
| H · Ø 26 mm | 965026H |
| H · Ø 32 mm | 965032H |
| H · Ø 40 mm | 965040H |
| H · Ø 32 mm (stainless steel fittings) | 965032H-I |
965032H-I is the Ø 32 mm jaw specifically for stainless steel fittings.
EUROPRESS jaws with profile HA (Velta, Polytherm, Welco-Flex, Biroduct)
| Version | Article no. |
|---|---|
| HA · Ø 12 mm | 965012HA |
| HA · Ø 14 mm | 965014HA |
| HA · Ø 16 mm | 965016HA |
| HA · Ø 17 mm | 965017HA |
| HA · Ø 18 mm | 965018HA |
| HA · Ø 20 mm | 965020HA |
| HA · Ø 25 mm | 965025HA |
| HA · Ø 26 mm | 965026HA |
| HA · Ø 32 mm | 965032HA |
EUROPRESS jaws with profile M (Mannesmann, Mapress, Chibro)
| Version | Article no. |
|---|---|
| M · Ø 12 mm | 965012M |
| M · Ø 15 mm | 965015M |
| M · Ø 18 mm | 965018M |
| M · Ø 22 mm | 965022M |
| M · Ø 28 mm | 965028M |
| M · Ø 35 mm | 965035M |
| M · Ø 42 mm | 965042M |
| M · Ø 54 mm | 965054M |
EUROPRESS jaws with profile SV (Viega, Nussbaum, IBP, Frabo)
| Version | Article no. |
|---|---|
| SV · Ø 12 mm | 965012SV |
| SV · Ø 15 mm | 965015SV |
| SV · Ø 18 mm | 965018SV |
| SV · Ø 22 mm | 965022SV |
| SV · Ø 28 mm | 965028SV |
| SV · Ø 35 mm | 965035SV |
| SV · Ø 42 mm | 965042SV |
| SV · Ø 54 mm | 965054SV |
EUROPRESS jaws with profile TH (Henco, Comap, Purmo, Gabotherm, Tiemme)
| Version | Article no. |
|---|---|
| TH · Ø 14 mm | 965014TH |
| TH · Ø 16 mm | 965016TH |
| TH · Ø 18 mm | 965018TH |
| TH · Ø 20 mm | 965020TH |
| TH · Ø 26 mm | 965026TH |
| TH · Ø 32 mm | 965032TH |
| TH · Ø 40 mm | 965040TH |
| TH · Ø 50 mm | 965050TH |
| TH · Ø 63 mm (pressing chain) | 965063TH |
965063TH is a pressing chain for Ø 63 mm.
EUROPRESS jaws with profiles U, UC and C (Unicor, Wavin, Coes, Chemidro, Nupi)
| Version | Article no. |
|---|---|
| U · Ø 14 mm | 965014U |
| U · Ø 16 mm | 965016U |
| U · Ø 18 mm | 965018U |
| U · Ø 20 mm | 965020U |
| U · Ø 25 mm | 965025U |
| U · Ø 32 mm | 965032U |
| U · Ø 40 mm | 965040U |
| U · Ø 50 mm (not for Unicor) | 965050U |
| UC · Ø 32 mm | 965032UC |
| C · Ø 26 mm (Chemidro, Nupi) | 965026C |
The U jaw Ø 50 mm is not suitable for Unicor Unipipe; the C jaw Ø 26 mm is designed specifically for Chemidro and Nupi.
Which EUROPRESS jaw for which press fitting system?
The table lists the press fitting systems for which CBC names a jaw profile, together with the jaw sizes from the current CBC range. Where a system is not listed, the profile stated by the fitting manufacturer decides.
Press fitting systems and CBC jaw profiles
| Press fitting system | Profile | Jaw Ø (mm) |
|---|---|---|
| Biroduct P | HA | 12, 16, 20 |
| Chemidro Sanitherm | U, C | U 16, 18, 20, 32; C 26 |
| Coes Klima | U | 16, 18, 20, 25, 32 |
| Comap Sudopress Multiskin | TH | 14, 16, 18, 20, 26, 32, 40, 50 |
| Comap Sudopress Cu | SV | 12, 15, 18, 22, 28, 35, 42, 54 |
| Comisa, Hitec, Multi-Coated System, Brasstech | TH | 14, 16, 20, 26, 32 |
| Fra.Bo-Press | SV | 12, 15, 18, 22, 28 |
| Gabotherm | TH | 16, 18, 20 |
| Geberit Mepla | G | 16, 20, 26, 32, 40, 50 |
| +GF+ Aquapress | U | 16, 18, 20, 25 |
| Giacomini Flex/Therm | TH | 14, 16, 18, 20, 26 |
| Harden 2000, Polypex 2000 | TH | 14, 16, 20, 26, 32 |
| IBP B-Press | SV | 12, 15, 18, 22, 28, 35, 42, 54 |
| Idrostar | TH | 14, 16, 18, 20, 26 |
| IPA | TH | 14, 16, 18, 20, 26, 32, 40, 50 |
| Jupiter Heizsysteme | U | 16, 20, 25, 32, 40, 50 |
| Mannesmann Mapress | M | 12, 15, 18, 22, 28, 35, 42, 54 |
| Nirosan Multifit | SV | 12, 15, 18, 22, 28, 35, 42, 54 |
| Nupi Multinupi | U, C | U 14, 16, 18, 20, 32, 40, 50; C 26 |
| Nussbaum Cupress, Optipress | SV | 12, 15, 18, 22, 28, 35, 42, 54 |
| Pavitherm Multistabil | TH | 14, 16, 18, 20, 26, 32 |
| Polytherm Polyfix, Polyfix-MT | HA | 12, 14, 16, 20, 26, 32 |
| Prandelli Multyrama | H | 14, 16, 18, 20, 26, 32 |
| Remo | H | 14, 16, 18, 20, 26, 32, 40 |
| Roth | H | 14, 17, 20 |
| Simplex Sirocon Cu/E | M | 12, 15, 18, 22 |
| Simplex Sirocon K | H | 14, 16, 20 |
| Systemtechnik SST Delphi Press | TH | 14, 16, 20, 26, 32, 40 |
| Tiemme Cobrapress | TH | 14, 16, 18, 20, 26 |
| Valsir Pexal, Aquatechnik | H | 14, 16, 20, 26, 32, 40; stainless: 32 |
| Velta Fußbodenheizung, Velta Rapex P | HA | 14, 16, 17, 20, 25, 26, 32 |
| Viega Profipress, Profipress G, Profipress Therm, Sanpress | SV | 12, 15, 18, 22, 28, 35, 42, 54 |
| Wavin Tigris | U | 16, 18, 20, 25, 32, 40 |
| Zecchini Idropiù | U | 14, 16, 18, 25 |
Suitable CBC EUROPRESS presses and cases
The jaws fit:
Manufacturer information
Manufacturer details in accordance with the EU General Product Safety Regulation (EU) 2023/988:
| Manufacturer | C.B.C. S.r.l. |
|---|---|
| Postal address | Via L. Einaudi, 3, 42016 Guastalla (RE), Italy |
| cbc@cbc.it |
