Working pipe ends with the OB pipe benders
The kit transforms a CBC hydraulic pipe bender into a tool for pipe ends. Using the same body, sockets and flares can be made on annealed copper and multilayer pipes quickly. The kit is compatible with the OB/85S, OB/85SB, OB 2003 E, and MC 2005. The vice clamps the pipe in place while the punch, which is driven by the bender, forms the end.
Versions A (10–22 mm) and B (6–22 mm) are designed for annealed copper pipes and each contain two vices, seven punches, a conical punch, and a flange punch in a plastic case. Version C works on multilayer pipes with diameters of 16, 20, and 26 mm. The complete OB/85S kit is available as the OB/KIT.
Technical Data
| Suitable for | OB/85S, OB/85SB, OB 2003 E, MC 2005 |
|---|---|
| Operations | sockets and flares on pipe ends |
| Case | plastic case (010081) |
Versions of the CBC flaring and expanding kit
| Version | Article no. | Vices | Punches | Weight |
|---|---|---|---|---|
| A · copper 10–22 mm | 9150001 | 10–16, 18–22 | Ø 10, 12, 14, 16, 18, 20, 22 mm, conical punch, flange punch | 1.5 kg / 3.3 lb |
| B · copper 1/4″–7/8″ | 9150010 | 1/4″–1/2″, 5/8″–7/8″ | 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, conical punch, flange punch | 1.5 kg / 3.3 lb |
| C · multilayer 16–26 mm | 9150025 | 16–26 | Ø 16, 20, 26 mm for multilayer pipes | 1.2 kg / 2.6 lb |
Matching pipe benders
The kit works with:
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.
Portable hydraulic pipe bender CBC OB/85S (10, 12, 14, 16, 18, 20, 22 mm, 3 counterformers)
637.32 €