The Mingori GS de Production at a glance
The GS de Production features a cabinet with casters that carries the GS bending module. A protected compartment holds the hydraulic power unit and a second compartment stores the tooling. This machine is easy to move around the workshop and is ideal for medium-sized production runs and prototyping.
A hydraulic unit with an electric motor turns the bending form via a rack. The tube is drawn around the form from 0° to 180°, and an automatic angle stop ends the bend at the set angle. The basic model can bend steel, stainless steel, aluminum, copper, and copper alloy tubes up to 40 mm in diameter with hollow tooling. For thin-walled tubes and very short radii, the machine can be fitted with a mandrel device, including a mandrel arm, mandrel rod, and clamping device.
Technical Data
| Tube diameter | up to Ø 40 mm |
|---|---|
| Bending angle | 0–180° |
| Max. section modulus | I/V 4.8 cm³ (steel tube E24) |
| Motor | 1250 W, 50 Hz, 230/400 V three-phase (state the voltage when ordering) |
| Bending speed | 2.5 rpm; 6 s for a 90° bend |
| Footprint | 0.84 × 0.35 m, height 1.05 m |
| Options | cycle foot pedal; plane positioner with 2 m or 3 m scale rail and 4 length stops; barrel for 4 angles |
Version of the GS de Production
| Version | Article no. | Bending | Motor |
|---|---|---|---|
| GS de Production, basic model | 65 7703 | hollow tooling; mandrel device on request | 1250 W |
Tooling (form, guide counter-form, clamp) is selected to suit your tubes.
Further Mingori machines for rotary draw bending
The GS module with OB 30 / OBM 60, or a machine on a long frame:
Manufacturer information
Manufacturer details in accordance with the EU General Product Safety Regulation (EU) 2023/988:
| Manufacturer | DESCOMBES PRECIMECA |
|---|---|
| Postal address | ZA La Justice, 125 Chemin de Solerieux, 26130 Saint-Restitut, France |
| contact@descombes26.com |
