Standard price list
  1. All Products
  2. Tube Bending Machines
  3. Mingori petroleum-type pipe benders OB 50 P, OBMP 150 and OBMEP 150 for pipes 4″ to 8″

Mingori petroleum-type pipe benders OB 50 P, OBMP 150 and OBMEP 150 for pipes 4″ to 8″

https://tinseltools.com/web/image/product.template/431/image_1920?unique=d007ad2

0.00 € 0.0 EUR 0.00 € VAT Included

Price on request

  • Version

This combination does not exist.

Contact Us


Pipe Bender for Large Pipes

Mingori Petroleum Type


OB 50 P – OBMP 150 – OBMEP 150 – 4″ to 8″



Mingori petroleum-type pipe benders at a glanceThe three Mingori petroleum-type drivesOther Mingori pipe benders for large pipesManufacturer information

Mingori petroleum-type pipe benders at a glance

Mingori benders, designed for petroleum-type applications, are capable of push-bending API and ASA pipes ranging from 4″ to 8″ (Ø 114.3 to 219 mm). PE-coated pipes can also be bent. A 30-ton double-acting cylinder works on a long frame, and the pipe runs on side rollers and forms. This setup allows for unlimited bending angles. The minimum bending radius is 2 m; there is no maximum.

Three models are available: the OB 50 P with a hand pump, the OBMP 150 with a 400-volt electric motor for workshops, and the OBMEP 150 with a gasoline engine for sites without power. The cylinder has two speeds: fast when advancing without a load and slow when under a load. An eccentric device releases the pipe after bending.

Technical Data

PipesAPI and ASA, also PE-coated, 4″–8″ (Ø 114.3–219 mm)
Cylinderdouble-acting, 30 t, two speeds
Bending angle / radiusno limit / at least 2 m
Max. section modulusI/V 401 cm³
FootprintL 2.80 m × W 1.80 m × H 0.75 m
Formscast steel, 4″, 5″, 6″ and 8″ (not included)

The three Mingori petroleum-type drives

VersionArticle no.DriveWeightWooden case
OB 50 P65 1811hand pump390 kg / 859.8 lb980 × 360 × 500 mm / 38.58 × 14.17 × 19.69 in
OBMP 15065 1812electric motor 3000 W, 400 V475 kg / 1,047.2 lb440 × 760 × 1,200 mm / 17.32 × 29.92 × 47.24 in
OBMEP 15065 1813petrol engine462 kg / 1,018.5 lb440 × 760 × 1,200 mm / 17.32 × 29.92 × 47.24 in

Supplied with flange pair and stirrup support in a wooden case; the forms 4″ to 8″ for API/ASA or PE-coated pipes and a conversion kit for pipes 2″1/4 to 4″ are available separately. Weights as stated in the manufacturer's catalogue.

Other Mingori pipe benders for large pipes

From 2″ to 16″:

Manufacturer information

Manufacturer details in accordance with the EU General Product Safety Regulation (EU) 2023/988:

ManufacturerDESCOMBES PRECIMECA
Postal addressZA La Justice, 125 Chemin de Solerieux, 26130 Saint-Restitut, France
E-mailcontact@descombes26.com