The CBC swivel arm at a glance
The CBC swivel arm is an accessory for bending without mandrel on the UNI pipe bending machines. CBC describes it as a moving plane of bend: the arm swings along with the pipe and is supplied complete with a plane regulator. CBC shows the UNI 42 and UNI 60 digital, the UNI 63 and the UNI 70/C in versions complete with swivel arm.
The arm is matched to each machine: for the UNI 42 in lengths of 1 to 4 m, for the UNI 60 and UNI 63 in 1 to 6 m and for the UNI 70/C and UNI 76 in 2 to 6 m. The usable length is 0.30 m shorter than the arm, i.e. 0.70 to 5.70 m. It is not used on the machine versions with mandrel.
Technical Data
| Design | swinging arm with plane regulator and floor support |
|---|---|
| Application | bending without mandrel |
| Arm lengths | 1–6 m depending on the machine |
| Usable length | arm length minus 0.30 m (0.70–5.70 m) |
Versions of the CBC swivel arm
Choose the machine and the arm length; each combination has its own CBC article number.
| Version | Article no. | Usable length |
|---|---|---|
| UNI 42 · 1 m | 000825 | 0.70 m |
| UNI 42 · 2 m | 000826 | 1.70 m |
| UNI 42 · 3 m | 000933 | 2.70 m |
| UNI 42 · 4 m | 000916 | 3.70 m |
| UNI 60 · 1 m | 000841 | 0.70 m |
| UNI 60 · 2 m | 000842 | 1.70 m |
| UNI 60 · 3 m | 000937 | 2.70 m |
| UNI 60 · 4 m | 000938 | 3.70 m |
| UNI 60 · 5 m | 000986 | 4.70 m |
| UNI 60 · 6 m | 0001177 | 5.70 m |
| UNI 63 · 1 m | 0001242-1 | 0.70 m |
| UNI 63 · 2 m | 0001242-2 | 1.70 m |
| UNI 63 · 3 m | 0001242-3 | 2.70 m |
| UNI 63 · 4 m | 0001242-4 | 3.70 m |
| UNI 63 · 5 m | 0001242-5 | 4.70 m |
| UNI 63 · 6 m | 0001242-6 | 5.70 m |
| UNI 70/C · 2 m | 000815 | 1.70 m |
| UNI 70/C · 3 m | 000819 | 2.70 m |
| UNI 70/C · 4 m | 000847 | 3.70 m |
| UNI 70/C · 5 m | 000838 | 4.70 m |
| UNI 70/C · 6 m | 0001083 | 5.70 m |
| UNI 76 · 2 m | 0001160 | 1.70 m |
| UNI 76 · 3 m | 0001161 | 2.70 m |
| UNI 76 · 4 m | 0001162 | 3.70 m |
| UNI 76 · 5 m | 0001163 | 4.70 m |
| UNI 76 · 6 m | 0001164 | 5.70 m |
Suitable CBC pipe bending machines
The swivel arm is available for these machines without mandrel: