Pipe bender finder: the right machine for your pipe
Enter the pipe type, the outside diameter and the wall thickness: the finder lists the pipe bending machines in our shop that can bend this pipe according to the manufacturer's data, starting with the smallest suitable machine. If you like, narrow the list down by drive, mandrel and throughput.
Choose the pipe type and enter the size. Until then, all pipe bending machines in our shop are listed below.
Matching machines: 0 Smallest suitable machine first; the values that fit your pipe are shown in bold.
No machine in our shop matches these values according to the manufacturer's data. Send us your pipe dimensions – we will check special formers and further machines. Contact us
Series production with high throughput? For large quantities, automated CNC tube bending machines from Herber are usually the better choice: they load, bend and unload automatically and can be integrated into production lines. They are not in our shop – we will be glad to advise you. Below are the machines from our shop with program memory or series equipment for smaller batches.
CBC P/22A
Mechanical Hand Pipe Bender
by hand without mandrel portable
- Annealed Copper Pipes: up to Ø 22 mm, wall up to 1 mm
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 32 mm, wall up to 3 mm
CBC OB/85S
Hydraulic Hand Pipe Bender
by hand without mandrel portable
- Annealed Copper Pipes: up to Ø 22 mm, wall up to 1.5 mm
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 32 mm, wall up to 3 mm
CBC OB/85S+
Pipe Bender for Hydraulic Lines
by hand without mandrel portable
- Annealed Stainless Steel Pipes: up to Ø 18 mm, wall up to 1.2 mm
- Bonderized Steel Pipes: up to Ø 18 mm, wall up to 2 mm
- Annealed and Semi-Hard Copper Pipes: up to Ø 22 mm, wall up to 1 mm
CBC OB/85SB
Battery-Powered Hydraulic Pipe Bender
battery without mandrel portable
- Annealed Copper Pipes: up to Ø 22 mm, wall up to 2.5 mm
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 32 mm, wall up to 3 mm
CBC OB/85SB+
Battery Pipe Bender for Hydraulic Lines
battery without mandrel portable
- Annealed Stainless Steel Pipes: up to Ø 18 mm, wall up to 1.2 mm
- Bonderized Steel Pipes: up to Ø 18 mm, wall up to 2 mm
- Annealed Copper Pipes: up to Ø 22 mm, wall up to 1 mm
CBC OB/KIT
Bending and Flaring Set
by hand without mandrel portable
A · 10–22 mm B · 1/4"–7/8"
- Annealed Copper Pipes: Ø 10–22 mm – A · 10–22 mm
- Annealed Copper Pipes: Ø 1/4″–7/8″ – B · 1/4"–7/8"
CBC FLEX 22
Portable Electric Pipe Bender
electric battery without mandrel portable
FLEX 22 / FLEX 22V battery
- Hard and Soft Copper Pipes: up to Ø 28 mm, wall up to 1.5 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 28 mm, wall up to 1.5 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 25 mm, wall up to 3 mm
- Gas Pipes UNI 5745: up to 3/4″, standard wall
- Plastic-Coated Pipes, Mannesmann Type (1 mm Coating): up to Ø 30 mm, wall up to 1.5 mm
CBC MC 2005
Electro-Hydraulic Pipe Bender
electric without mandrel portable
- Annealed Copper Pipes: up to Ø 22 mm
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 50 mm
- Annealed Stainless Steel Pipes: up to Ø 22 mm, wall up to 1.2 mm
- Bonderized Steel Pipes: up to Ø 22 mm, wall up to 2 mm
CBC OB 2003 E
Electro-Hydraulic Pipe Bender
electric without mandrel portable
- Annealed Copper Pipes: up to Ø 22 mm, wall up to 2.5 mm
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 50 mm, wall up to 4 mm
- Annealed Stainless Steel Pipes: up to Ø 22 mm, wall up to 1.2 mm
- Bonderized Steel Pipes: up to Ø 22 mm, wall up to 2 mm
CBC UNI 22
Manual Pipe Bending Machine
by hand without mandrel
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 28 mm, wall from 1.5 mm
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 32 mm, standard wall
- Stainless Steel AISI 304/316 Pipes: up to Ø 28 mm, wall from 1.5 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 25 mm, wall from 3 mm, with universal roller
- Plastic-Coated Pipes, Mannesmann Type (1 mm Coating): up to Ø 30 mm, wall from 1.5 mm
- Gas Pipes UNI 5745: up to 3/4″, standard wall, with universal roller
CBC UNI 42
Mobile Pipe Bending Machine
by hand electric without mandrel program memory / series work
Mechanical Electric Digital-electric with program memory
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 42 mm, wall up to 1.5 mm
- Steel Pipes for Electrical Installations: up to Ø 40 mm, wall up to 1.5 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 30 mm, wall up to 2 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 42 mm, wall up to 3 mm
- Furniture Tubes: up to Ø 42 mm, wall up to 3 mm – Mechanical
- FE Boiler Pipes: up to Ø 42 mm, wall up to 3 mm
- Aluminium Pipes: up to Ø 42 mm, wall up to 3 mm
- Gas Pipes UNI 5745: up to 1″1/4, standard wall
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 50 mm, standard wall
- Furniture Tubes: up to Ø 42 mm, wall up to 2 mm – Electric, Digital-electric with program memory
CBC UNI 60
Mobile Pipe Bending Machine
electric without mandrel program memory / series work
Electric Digital-electric with program memory
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 54 mm, wall up to 2 mm
- Steel Pipes for Electrical Installations: up to Ø 50 mm, wall up to 1.5 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 35 mm, wall up to 3 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 48 mm, wall up to 4 mm
- Furniture Tubes: up to Ø 48 mm, wall up to 3 mm
- FE Boiler Pipes: up to Ø 48 mm, wall up to 3 mm
- Aluminium Pipes: up to Ø 54 mm, wall up to 3 mm
- Gas Pipes UNI 5745: up to 1″1/2, standard wall
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 63 mm, standard wall
CBC UNI 60 COMBI-CAL
Pipe Bending and Ring Rolling Machine
electric without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 54 mm, wall up to 2 mm
- Steel Pipes for Electrical Installations: up to Ø 50 mm, wall up to 1.5 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 35 mm, wall up to 3 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 48 mm, wall up to 4 mm
- Furniture Tubes: up to Ø 48 mm, wall up to 3 mm
- FE Boiler Pipes: up to Ø 48 mm, wall up to 3 mm
- Aluminium Pipes: up to Ø 54 mm, wall up to 3 mm
- Gas Pipes UNI 5745: up to 1″1/2, standard wall
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 63 mm, standard wall
CBC UNI 63
Three-Phase Pipe Bending Machine
electric without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 54 mm, wall up to 2 mm
- Steel Pipes for Electrical Installations: up to Ø 50 mm, wall up to 1.5 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 35 mm, wall up to 3 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 48 mm, wall up to 4 mm
- Furniture Tubes: up to Ø 48 mm, wall up to 3 mm
- FE Boiler Pipes: up to Ø 48 mm, wall up to 3 mm
- Aluminium Pipes: up to Ø 54 mm, wall up to 3 mm
- Gas Pipes UNI 5745: up to 1″1/2, standard wall
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 63 mm, standard wall
CBC UNI 63
Mandrel Pipe Bending Machine
electric with mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 35 mm, wall up to 3 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 30 mm, wall up to 2 mm
- Furniture Tubes: up to Ø 35 mm, wall up to 2 mm
- Gas Pipes UNI 5745: up to 1″, standard wall
CBC UNI 70/C
Digital Pipe Bending Machine
electric without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 60 mm, wall up to 4 mm
- Steel Pipes for Electrical Installations: up to Ø 60 mm, wall up to 2 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 60 mm, wall up to 3 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 60 mm, wall up to 4 mm
- Furniture Tubes: up to Ø 60 mm, wall up to 3 mm
- FE Boiler Pipes: up to Ø 60 mm, wall up to 4 mm
- Aluminium Pipes: up to Ø 60 mm, wall up to 8 mm
- Gas Pipes UNI 5745: up to 2″, standard wall
- Square Tubes: up to 50 × 50 mm, wall up to 4 mm
CBC UNI 70/C
Mandrel Pipe Bending Machine
electric with mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 50 mm, wall up to 4 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 50.8 mm, wall up to 3 mm
- Furniture Tubes: up to Ø 50 mm, wall up to 3 mm
- FE Boiler Pipes: up to Ø 50 mm, wall up to 4 mm
- Aluminium Pipes: up to Ø 50 mm, wall up to 8 mm
- Square Tubes: up to 40 × 40 mm, wall up to 4 mm
CBC UNI 70/C-OS
With and Without Mandrel
electric with and without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 60 mm, wall up to 4 mm, without mandrel
- Steel Pipes for Electrical Installations: up to Ø 60 mm, wall up to 2 mm, without mandrel
- Stainless Steel AISI 304/316 Pipes: up to Ø 60 mm, wall up to 3 mm, without mandrel
- Hydraulic Steel Pipes St 35.4: up to Ø 60 mm, wall up to 4 mm, without mandrel
- Furniture Tubes: up to Ø 60 mm, wall up to 3 mm, without mandrel
- FE Boiler Pipes: up to Ø 60 mm, wall up to 4 mm, without mandrel
- Aluminium Pipes: up to Ø 60 mm, wall up to 8 mm, without mandrel
- Gas Pipes UNI 5745: up to 2″, standard wall, without mandrel
- Square Tubes: up to 50 × 50 mm, wall up to 4 mm, without mandrel
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 50 mm, wall up to 4 mm, with mandrel
- Stainless Steel AISI 304/316 Pipes: up to Ø 50.8 mm, wall up to 3 mm, with mandrel
- Furniture Tubes: up to Ø 50 mm, wall up to 3 mm, with mandrel
- FE Boiler Pipes: up to Ø 50 mm, wall up to 4 mm, with mandrel
- Aluminium Pipes: up to Ø 50 mm, wall up to 8 mm, with mandrel
- Square Tubes: up to 40 × 40 mm, wall up to 4 mm, with mandrel
CBC UNI 70/HC
Electro-Hydraulic Mandrel Bender
electric with mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 50 mm, wall up to 3 mm
- Steel Pipes for Electrical Installations: up to Ø 50 mm, wall up to 2 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 50.8 mm, wall up to 1.5 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 50 mm, wall up to 3 mm
- Furniture Tubes: up to Ø 50 mm, wall up to 2 mm
- FE Boiler Pipes: up to Ø 50 mm, wall up to 2 mm
- Aluminium Pipes: up to Ø 50 mm, wall up to 4 mm
- Gas Pipes UNI 5745: up to Ø 48 mm, wall up to 3 mm
- Square Tubes: up to 40 × 40 mm, wall up to 3 mm
CBC UNI 70/HC-OS
With and Without Mandrel
electric with and without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 50 mm, wall up to 3 mm, with mandrel
- Steel Pipes for Electrical Installations: up to Ø 50 mm, wall up to 2 mm, with mandrel
- Stainless Steel AISI 304/316 Pipes: up to Ø 50.8 mm, wall up to 1.5 mm, with mandrel
- Hydraulic Steel Pipes St 35.4: up to Ø 50 mm, wall up to 3 mm, with mandrel
- Furniture Tubes: up to Ø 50 mm, wall up to 2 mm, with mandrel
- FE Boiler Pipes: up to Ø 50 mm, wall up to 2 mm, with mandrel
- Aluminium Pipes: up to Ø 50 mm, wall up to 4 mm, with mandrel
- Gas Pipes UNI 5745: up to Ø 48 mm, wall up to 3 mm, with mandrel
- Square Tubes: up to 40 × 40 mm, wall up to 3 mm, with mandrel
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 60 mm, wall up to 4 mm, without mandrel
- Steel Pipes for Electrical Installations: up to Ø 60 mm, wall up to 2 mm, without mandrel
- Stainless Steel AISI 304/316 Pipes: up to Ø 60 mm, wall up to 3 mm, without mandrel
- Hydraulic Steel Pipes St 35.4: up to Ø 60 mm, wall up to 4 mm, without mandrel
- Furniture Tubes: up to Ø 60 mm, wall up to 3 mm, without mandrel
- FE Boiler Pipes: up to Ø 60 mm, wall up to 4 mm, without mandrel
- Aluminium Pipes: up to Ø 60 mm, wall up to 8 mm, without mandrel
- Gas Pipes UNI 5745: up to Ø 60 mm, standard wall, without mandrel
- Square Tubes: up to 50 × 50 mm, wall up to 4 mm, without mandrel
CBC UNI 76
Universal Pipe Bending Machine
electric without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 76 mm, wall up to 8 mm
- Steel Pipes for Electrical Installations: up to Ø 76 mm, wall up to 6 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 76 mm, wall up to 4 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 76 mm, wall up to 6 mm
- Furniture Tubes: up to Ø 76 mm, wall up to 6 mm
- FE Boiler Pipes: up to Ø 76 mm, wall up to 6 mm
- Aluminium Pipes: up to Ø 76 mm, wall up to 8 mm
- Gas Pipes UNI 5745: up to 2″1/2, standard wall
- Square Tubes: up to 60 × 60 mm, wall up to 3 mm
CBC UNI 80
Electro-Hydraulic Mandrel Bender
electric with mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 76 mm, wall up to 1.5 mm
- Steel Pipes for Electrical Installations: up to Ø 76 mm, wall up to 2 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 63.5 mm, wall up to 3 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 76 mm, wall up to 3 mm
- Furniture Tubes: up to Ø 76 mm, wall up to 2 mm
- FE Boiler Pipes: up to Ø 76 mm, wall up to 2 mm
- Aluminium Pipes: up to Ø 76 mm, wall up to 4 mm
- Gas Pipes UNI 5745: up to 2″1/2, wall up to 3 mm
- Square Tubes: up to 60 × 60 mm, wall up to 3 mm
CBC UNI 89
Universal Pipe Bending Machine
electric without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 90 mm, wall up to 10 mm
- Steel Pipes for Electrical Installations: up to Ø 90 mm, wall up to 8 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 89 mm, wall up to 6 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 89 mm, wall up to 8 mm
- Furniture Tubes: up to Ø 89 mm, wall up to 10 mm
- FE Boiler Pipes: up to Ø 89 mm, wall up to 8 mm
- Aluminium Pipes: up to Ø 89 mm, wall up to 10 mm
- Gas Pipes UNI 5745: up to 3″, standard wall
- Square Tubes: up to 70 × 70 mm, wall up to 5 mm
CBC UNI 90
Electro-Hydraulic Mandrel Bender
electric with mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 90 mm, wall up to 3 mm
- Steel Pipes for Electrical Installations: up to Ø 90 mm, wall up to 2 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 80 mm, wall up to 3 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 90 mm, wall up to 3 mm
- Furniture Tubes: up to Ø 90 mm, wall up to 2 mm
- FE Boiler Pipes: up to Ø 90 mm, wall up to 2 mm
- Aluminium Pipes: up to Ø 90 mm, wall up to 4 mm
- Gas Pipes UNI 5745: up to 3″, wall up to 3 mm
- Square Tubes: up to 70 × 70 mm, wall up to 3 mm
CBC UNI 120
Digital Pipe Bending Machine
electric without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 139.7 mm, wall up to 8 mm
- Steel Pipes for Electrical Installations: up to Ø 114.3 mm, wall up to 8 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 114.3 mm, wall up to 6 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 114.3 mm, wall up to 8 mm
- Furniture Tubes: up to Ø 114.3 mm, wall up to 10 mm
- FE Boiler Pipes: up to Ø 114.3 mm, wall up to 8 mm
- Aluminium Pipes: up to Ø 139.7 mm, wall up to 9 mm
- Gas Pipes UNI 5745: up to 4″, wall up to 8 mm
- Square Tubes: up to 90 × 90 mm, wall up to 10 mm
CBC Minicalandra
Mini Ring Rolling Machine
by hand electric without mandrel
Mechanical Digital, 230 V
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 22 mm, wall up to 3 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 16 mm, wall up to 2 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 22 mm, wall up to 3 mm
River Amica 3
Lever Pipe Bender for Pipes from Coils
by hand without mandrel portable
- Annealed copper pipes, bare or coated: Ø 10–22 mm
- Multilayer pipes: Ø 26 and 32 mm
River Girella
Lever Pipe Bender for Copper
by hand without mandrel portable
Girella · Ø 10–16 mm Girella · Ø 6–16 mm
- Annealed Copper Pipes: Ø 10–16 mm – Girella · Ø 10–16 mm
- Hard copper in bars: Ø 10–14 mm – Girella · Ø 10–16 mm
- PVC-coated pipes: Ø 10–14 mm – Girella · Ø 10–16 mm
- Annealed Copper Pipes: Ø 6–16 mm – Girella · Ø 6–16 mm
- Hard copper in bars: Ø 6–14 mm – Girella · Ø 6–16 mm
- PVC-coated pipes: Ø 6–14 mm – Girella · Ø 6–16 mm
River N. 78 – GM 600
Hydraulic Pipe Bender with Hand Pump
by hand without mandrel
N. 78 N. 30 N. 32 GM 300 GM 400 GM 500 GM 600
- Steel gas pipes: 3/8″ to 1″1/2 – N. 78
- Steel gas pipes: 3/8″ to 2″ – N. 30
- Steel gas pipes: 3/8″ to 2″1/2 – N. 32
- Steel gas pipes: 3/8″ to 3″ – GM 300
- Steel gas pipes: 1″ to 4″ – GM 400
- Steel gas pipes: 1″1/2 to 5″ – GM 500
- Steel gas pipes: 1″1/2 to 6″ – GM 600
River M116 – GME 600
Electro-Hydraulic Pipe Bender
electric without mandrel
M116 M116B M60 M60B M64 GME 300 GME 400 GME 500 GME 600
- Steel gas pipes: 3/8″ to 1″1/2 – M116, M116B
- Steel gas pipes: 3/8″ to 2″ – M60, M60B
- Steel gas pipes: 3/8″ to 2″1/2 – M64
- Steel gas pipes: 3/8″ to 3″ – GME 300
- Steel gas pipes: 1″ to 4″ – GME 400
- Steel gas pipes: 1″1/2 to 5″ – GME 500
- Steel gas pipes: 1″1/2 to 6″ – GME 600
Mingori OB 30 simple flasque
Hydraulic Pipe Bender without Upper Flange
by hand without mandrel
- Pipes (nominal size): 3/8″ to 1″1/4
Mingori 180° Pipe Benders
Pipe Bending to 180°
by hand electric without mandrel
OB 30 180° OBM 60 180° OB 40 180° OBM 140 180°
- Pipes (nominal size): 3/8″ to 2″ – OB 30 180°, OBM 60 180°
- Pipes (nominal size): 3/8″ to 3″ – OB 40 180°, OBM 140 180°
Mingori OBME 150
Hydraulic Pipe Bender with Petrol Engine
petrol engine without mandrel
- Steel gas pipes: 2″ to 4″
- API and ASA pipes: 2″ to 4″
- PE-coated pipes: 2″ to 4″
- Boiler pipes: Ø 60.3–114.3 mm
- Hydraulic pipes: Ø 60.3–114.3 mm
- Thick-walled aluminium pipes: Ø 60.3–114.3 mm
- Thick-walled copper pipes: Ø 60.3–114.3 mm
Mingori Petroleum Type
Pipe Bender for Large Pipes
by hand electric petrol engine without mandrel
OB 50 P OBMP 150 OBMEP 150
- API and ASA pipes: 4″ to 8″
- PE-coated pipes: 4″ to 8″
Mingori SUPER MP 150 / MEP 150
Pipe Bender for Pipes up to 16″
electric petrol engine without mandrel
SUPER MEP 150 SUPER MP 150
- API and ASA pipes: 4″ to 16″
Mingori GS 30 / GS 60
Rotary Draw Pipe Bender
by hand electric with and without mandrel
GS 30 GS 60
- Steel tubes: up to Ø 40 mm
- Stainless steel tubes: up to Ø 40 mm
- Aluminium tubes: up to Ø 40 mm
- Copper tubes: up to Ø 40 mm
- Copper alloy tubes: up to Ø 40 mm
Mingori GS de Production
Electric Tube Bender for the Workshop
electric without mandrel program memory / series work
- Steel tubes: up to Ø 40 mm
- Stainless steel tubes: up to Ø 40 mm
- Aluminium tubes: up to Ø 40 mm
- Copper tubes: up to Ø 40 mm
- Copper alloy tubes: up to Ø 40 mm
Mingori Multiplan Type 30 / 35
Rotary Draw Tube Bender for Series Work
by hand electric with and without mandrel program memory / series work
Type 30 Type 35
- Steel tubes: up to Ø 30 mm – Type 30
- Stainless steel tubes: up to Ø 26.9 mm – Type 30
- Aluminium tubes: up to Ø 40 mm
- Copper tubes: up to Ø 54 mm
- Square steel tubes: up to 20 × 20 mm – Type 30
- Square stainless steel tubes: up to 16 × 16 mm – Type 30
- Square aluminium tubes: up to 25 × 25 mm – Type 30
- Square copper tubes: up to 30 × 30 mm – Type 30
- Steel tubes: up to Ø 35 mm – Type 35
- Stainless steel tubes: up to Ø 33.7 mm – Type 35
- Square steel tubes: up to 25 × 25 mm – Type 35
- Square stainless steel tubes: up to 25 × 25 mm – Type 35
- Square aluminium tubes: up to 30 × 30 mm – Type 35
- Square copper tubes: up to 35 × 35 mm – Type 35
Mingori VOS / VOMS
Rotary Draw Pipe Bender with Oscillating Cylinder
by hand electric with and without mandrel
VOS 102 VOMS 204 VOS 40 VOMS 140
- Stainless steel tubes: Ø 10–60 mm, wall 1–3.2 mm, without mandrel – VOS 102, VOMS 204
- Stainless steel tubes: Ø 10–60 mm, wall 0.8–4 mm, with mandrel – VOS 102, VOMS 204
- Aluminium tubes: Ø 10–60 mm, wall 1–3.2 mm, without mandrel – VOS 102, VOMS 204
- Aluminium tubes: Ø 10–60 mm, wall 0.8–4 mm, with mandrel – VOS 102, VOMS 204
- Copper tubes: Ø 10–60 mm, wall 1–3.2 mm, without mandrel – VOS 102, VOMS 204
- Copper tubes: Ø 10–60 mm, wall 0.8–4 mm, with mandrel – VOS 102, VOMS 204
- Brass tubes: Ø 10–60 mm, wall 1–3.2 mm, without mandrel – VOS 102, VOMS 204
- Brass tubes: Ø 10–60 mm, wall 0.8–4 mm, with mandrel – VOS 102, VOMS 204
- Steel tubes for construction, heating and thin-walled hydraulics: Ø 10–60 mm, wall 1–3.2 mm, without mandrel – VOS 102, VOMS 204
- Steel tubes for construction, heating and thin-walled hydraulics: Ø 10–60 mm, wall 0.8–4 mm, with mandrel – VOS 102, VOMS 204
- Square tubes: side length 20–50 mm, wall 1–3.2 mm, without mandrel – VOS 102, VOMS 204
- Stainless steel tubes: Ø 10–80 mm, wall 1–3.2 mm, without mandrel – VOS 40, VOMS 140
- Stainless steel tubes: Ø 10–80 mm, wall 0.8–4 mm, with mandrel – VOS 40, VOMS 140
- Aluminium tubes: Ø 10–80 mm, wall 1–3.2 mm, without mandrel – VOS 40, VOMS 140
- Aluminium tubes: Ø 10–80 mm, wall 0.8–4 mm, with mandrel – VOS 40, VOMS 140
- Copper tubes: Ø 10–80 mm, wall 1–3.2 mm, without mandrel – VOS 40, VOMS 140
- Copper tubes: Ø 10–80 mm, wall 0.8–4 mm, with mandrel – VOS 40, VOMS 140
- Brass tubes: Ø 10–80 mm, wall 1–3.2 mm, without mandrel – VOS 40, VOMS 140
- Brass tubes: Ø 10–80 mm, wall 0.8–4 mm, with mandrel – VOS 40, VOMS 140
- Steel tubes for construction, heating and thin-walled hydraulics: Ø 10–80 mm, wall 1–3.2 mm, without mandrel – VOS 40, VOMS 140
- Steel tubes for construction, heating and thin-walled hydraulics: Ø 10–80 mm, wall 0.8–4 mm, with mandrel – VOS 40, VOMS 140
- Square tubes: side length 20–60 mm, wall 1–3.2 mm, without mandrel – VOS 40, VOMS 140
Choose the pipe type and enter the size. Until then, all pipe bending machines in our shop are listed below.
Matching machines: 0 Smallest suitable machine first; the values that fit your pipe are shown in bold.
No machine in our shop matches these values according to the manufacturer's data. Send us your pipe dimensions – we will check special formers and further machines. Contact us
Series production with high throughput? For large quantities, automated CNC tube bending machines from Herber are usually the better choice: they load, bend and unload automatically and can be integrated into production lines. They are not in our shop – we will be glad to advise you. Below are the machines from our shop with program memory or series equipment for smaller batches.
CBC P/22A
Mechanical Hand Pipe Bender
by hand without mandrel portable
- Annealed Copper Pipes: up to Ø 22 mm, wall up to 1 mm
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 32 mm, wall up to 3 mm
CBC OB/85S
Hydraulic Hand Pipe Bender
by hand without mandrel portable
- Annealed Copper Pipes: up to Ø 22 mm, wall up to 1.5 mm
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 32 mm, wall up to 3 mm
CBC OB/85S+
Pipe Bender for Hydraulic Lines
by hand without mandrel portable
- Annealed Stainless Steel Pipes: up to Ø 18 mm, wall up to 1.2 mm
- Bonderized Steel Pipes: up to Ø 18 mm, wall up to 2 mm
- Annealed and Semi-Hard Copper Pipes: up to Ø 22 mm, wall up to 1 mm
CBC OB/85SB
Battery-Powered Hydraulic Pipe Bender
battery without mandrel portable
- Annealed Copper Pipes: up to Ø 22 mm, wall up to 2.5 mm
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 32 mm, wall up to 3 mm
CBC OB/85SB+
Battery Pipe Bender for Hydraulic Lines
battery without mandrel portable
- Annealed Stainless Steel Pipes: up to Ø 18 mm, wall up to 1.2 mm
- Bonderized Steel Pipes: up to Ø 18 mm, wall up to 2 mm
- Annealed Copper Pipes: up to Ø 22 mm, wall up to 1 mm
CBC OB/KIT
Bending and Flaring Set
by hand without mandrel portable
A · 10–22 mm B · 1/4"–7/8"
- Annealed Copper Pipes: Ø 10–22 mm – A · 10–22 mm
- Annealed Copper Pipes: Ø 1/4″–7/8″ – B · 1/4"–7/8"
CBC FLEX 22
Portable Electric Pipe Bender
electric battery without mandrel portable
FLEX 22 / FLEX 22V battery
- Hard and Soft Copper Pipes: up to Ø 28 mm, wall up to 1.5 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 28 mm, wall up to 1.5 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 25 mm, wall up to 3 mm
- Gas Pipes UNI 5745: up to 3/4″, standard wall
- Plastic-Coated Pipes, Mannesmann Type (1 mm Coating): up to Ø 30 mm, wall up to 1.5 mm
CBC MC 2005
Electro-Hydraulic Pipe Bender
electric without mandrel portable
- Annealed Copper Pipes: up to Ø 22 mm
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 50 mm
- Annealed Stainless Steel Pipes: up to Ø 22 mm, wall up to 1.2 mm
- Bonderized Steel Pipes: up to Ø 22 mm, wall up to 2 mm
CBC OB 2003 E
Electro-Hydraulic Pipe Bender
electric without mandrel portable
- Annealed Copper Pipes: up to Ø 22 mm, wall up to 2.5 mm
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 50 mm, wall up to 4 mm
- Annealed Stainless Steel Pipes: up to Ø 22 mm, wall up to 1.2 mm
- Bonderized Steel Pipes: up to Ø 22 mm, wall up to 2 mm
CBC UNI 22
Manual Pipe Bending Machine
by hand without mandrel
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 28 mm, wall from 1.5 mm
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 32 mm, standard wall
- Stainless Steel AISI 304/316 Pipes: up to Ø 28 mm, wall from 1.5 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 25 mm, wall from 3 mm, with universal roller
- Plastic-Coated Pipes, Mannesmann Type (1 mm Coating): up to Ø 30 mm, wall from 1.5 mm
- Gas Pipes UNI 5745: up to 3/4″, standard wall, with universal roller
CBC UNI 42
Mobile Pipe Bending Machine
by hand electric without mandrel program memory / series work
Mechanical Electric Digital-electric with program memory
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 42 mm, wall up to 1.5 mm
- Steel Pipes for Electrical Installations: up to Ø 40 mm, wall up to 1.5 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 30 mm, wall up to 2 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 42 mm, wall up to 3 mm
- Furniture Tubes: up to Ø 42 mm, wall up to 3 mm – Mechanical
- FE Boiler Pipes: up to Ø 42 mm, wall up to 3 mm
- Aluminium Pipes: up to Ø 42 mm, wall up to 3 mm
- Gas Pipes UNI 5745: up to 1″1/4, standard wall
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 50 mm, standard wall
- Furniture Tubes: up to Ø 42 mm, wall up to 2 mm – Electric, Digital-electric with program memory
CBC UNI 60
Mobile Pipe Bending Machine
electric without mandrel program memory / series work
Electric Digital-electric with program memory
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 54 mm, wall up to 2 mm
- Steel Pipes for Electrical Installations: up to Ø 50 mm, wall up to 1.5 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 35 mm, wall up to 3 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 48 mm, wall up to 4 mm
- Furniture Tubes: up to Ø 48 mm, wall up to 3 mm
- FE Boiler Pipes: up to Ø 48 mm, wall up to 3 mm
- Aluminium Pipes: up to Ø 54 mm, wall up to 3 mm
- Gas Pipes UNI 5745: up to 1″1/2, standard wall
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 63 mm, standard wall
CBC UNI 60 COMBI-CAL
Pipe Bending and Ring Rolling Machine
electric without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 54 mm, wall up to 2 mm
- Steel Pipes for Electrical Installations: up to Ø 50 mm, wall up to 1.5 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 35 mm, wall up to 3 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 48 mm, wall up to 4 mm
- Furniture Tubes: up to Ø 48 mm, wall up to 3 mm
- FE Boiler Pipes: up to Ø 48 mm, wall up to 3 mm
- Aluminium Pipes: up to Ø 54 mm, wall up to 3 mm
- Gas Pipes UNI 5745: up to 1″1/2, standard wall
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 63 mm, standard wall
CBC UNI 63
Three-Phase Pipe Bending Machine
electric without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 54 mm, wall up to 2 mm
- Steel Pipes for Electrical Installations: up to Ø 50 mm, wall up to 1.5 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 35 mm, wall up to 3 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 48 mm, wall up to 4 mm
- Furniture Tubes: up to Ø 48 mm, wall up to 3 mm
- FE Boiler Pipes: up to Ø 48 mm, wall up to 3 mm
- Aluminium Pipes: up to Ø 54 mm, wall up to 3 mm
- Gas Pipes UNI 5745: up to 1″1/2, standard wall
- Multilayer Pipes (Double-Coated Aluminium): up to Ø 63 mm, standard wall
CBC UNI 63
Mandrel Pipe Bending Machine
electric with mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 35 mm, wall up to 3 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 30 mm, wall up to 2 mm
- Furniture Tubes: up to Ø 35 mm, wall up to 2 mm
- Gas Pipes UNI 5745: up to 1″, standard wall
CBC UNI 70/C
Digital Pipe Bending Machine
electric without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 60 mm, wall up to 4 mm
- Steel Pipes for Electrical Installations: up to Ø 60 mm, wall up to 2 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 60 mm, wall up to 3 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 60 mm, wall up to 4 mm
- Furniture Tubes: up to Ø 60 mm, wall up to 3 mm
- FE Boiler Pipes: up to Ø 60 mm, wall up to 4 mm
- Aluminium Pipes: up to Ø 60 mm, wall up to 8 mm
- Gas Pipes UNI 5745: up to 2″, standard wall
- Square Tubes: up to 50 × 50 mm, wall up to 4 mm
CBC UNI 70/C
Mandrel Pipe Bending Machine
electric with mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 50 mm, wall up to 4 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 50.8 mm, wall up to 3 mm
- Furniture Tubes: up to Ø 50 mm, wall up to 3 mm
- FE Boiler Pipes: up to Ø 50 mm, wall up to 4 mm
- Aluminium Pipes: up to Ø 50 mm, wall up to 8 mm
- Square Tubes: up to 40 × 40 mm, wall up to 4 mm
CBC UNI 70/C-OS
With and Without Mandrel
electric with and without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 60 mm, wall up to 4 mm, without mandrel
- Steel Pipes for Electrical Installations: up to Ø 60 mm, wall up to 2 mm, without mandrel
- Stainless Steel AISI 304/316 Pipes: up to Ø 60 mm, wall up to 3 mm, without mandrel
- Hydraulic Steel Pipes St 35.4: up to Ø 60 mm, wall up to 4 mm, without mandrel
- Furniture Tubes: up to Ø 60 mm, wall up to 3 mm, without mandrel
- FE Boiler Pipes: up to Ø 60 mm, wall up to 4 mm, without mandrel
- Aluminium Pipes: up to Ø 60 mm, wall up to 8 mm, without mandrel
- Gas Pipes UNI 5745: up to 2″, standard wall, without mandrel
- Square Tubes: up to 50 × 50 mm, wall up to 4 mm, without mandrel
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 50 mm, wall up to 4 mm, with mandrel
- Stainless Steel AISI 304/316 Pipes: up to Ø 50.8 mm, wall up to 3 mm, with mandrel
- Furniture Tubes: up to Ø 50 mm, wall up to 3 mm, with mandrel
- FE Boiler Pipes: up to Ø 50 mm, wall up to 4 mm, with mandrel
- Aluminium Pipes: up to Ø 50 mm, wall up to 8 mm, with mandrel
- Square Tubes: up to 40 × 40 mm, wall up to 4 mm, with mandrel
CBC UNI 70/HC
Electro-Hydraulic Mandrel Bender
electric with mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 50 mm, wall up to 3 mm
- Steel Pipes for Electrical Installations: up to Ø 50 mm, wall up to 2 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 50.8 mm, wall up to 1.5 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 50 mm, wall up to 3 mm
- Furniture Tubes: up to Ø 50 mm, wall up to 2 mm
- FE Boiler Pipes: up to Ø 50 mm, wall up to 2 mm
- Aluminium Pipes: up to Ø 50 mm, wall up to 4 mm
- Gas Pipes UNI 5745: up to Ø 48 mm, wall up to 3 mm
- Square Tubes: up to 40 × 40 mm, wall up to 3 mm
CBC UNI 70/HC-OS
With and Without Mandrel
electric with and without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 50 mm, wall up to 3 mm, with mandrel
- Steel Pipes for Electrical Installations: up to Ø 50 mm, wall up to 2 mm, with mandrel
- Stainless Steel AISI 304/316 Pipes: up to Ø 50.8 mm, wall up to 1.5 mm, with mandrel
- Hydraulic Steel Pipes St 35.4: up to Ø 50 mm, wall up to 3 mm, with mandrel
- Furniture Tubes: up to Ø 50 mm, wall up to 2 mm, with mandrel
- FE Boiler Pipes: up to Ø 50 mm, wall up to 2 mm, with mandrel
- Aluminium Pipes: up to Ø 50 mm, wall up to 4 mm, with mandrel
- Gas Pipes UNI 5745: up to Ø 48 mm, wall up to 3 mm, with mandrel
- Square Tubes: up to 40 × 40 mm, wall up to 3 mm, with mandrel
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 60 mm, wall up to 4 mm, without mandrel
- Steel Pipes for Electrical Installations: up to Ø 60 mm, wall up to 2 mm, without mandrel
- Stainless Steel AISI 304/316 Pipes: up to Ø 60 mm, wall up to 3 mm, without mandrel
- Hydraulic Steel Pipes St 35.4: up to Ø 60 mm, wall up to 4 mm, without mandrel
- Furniture Tubes: up to Ø 60 mm, wall up to 3 mm, without mandrel
- FE Boiler Pipes: up to Ø 60 mm, wall up to 4 mm, without mandrel
- Aluminium Pipes: up to Ø 60 mm, wall up to 8 mm, without mandrel
- Gas Pipes UNI 5745: up to Ø 60 mm, standard wall, without mandrel
- Square Tubes: up to 50 × 50 mm, wall up to 4 mm, without mandrel
CBC UNI 76
Universal Pipe Bending Machine
electric without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 76 mm, wall up to 8 mm
- Steel Pipes for Electrical Installations: up to Ø 76 mm, wall up to 6 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 76 mm, wall up to 4 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 76 mm, wall up to 6 mm
- Furniture Tubes: up to Ø 76 mm, wall up to 6 mm
- FE Boiler Pipes: up to Ø 76 mm, wall up to 6 mm
- Aluminium Pipes: up to Ø 76 mm, wall up to 8 mm
- Gas Pipes UNI 5745: up to 2″1/2, standard wall
- Square Tubes: up to 60 × 60 mm, wall up to 3 mm
CBC UNI 80
Electro-Hydraulic Mandrel Bender
electric with mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 76 mm, wall up to 1.5 mm
- Steel Pipes for Electrical Installations: up to Ø 76 mm, wall up to 2 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 63.5 mm, wall up to 3 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 76 mm, wall up to 3 mm
- Furniture Tubes: up to Ø 76 mm, wall up to 2 mm
- FE Boiler Pipes: up to Ø 76 mm, wall up to 2 mm
- Aluminium Pipes: up to Ø 76 mm, wall up to 4 mm
- Gas Pipes UNI 5745: up to 2″1/2, wall up to 3 mm
- Square Tubes: up to 60 × 60 mm, wall up to 3 mm
CBC UNI 89
Universal Pipe Bending Machine
electric without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 90 mm, wall up to 10 mm
- Steel Pipes for Electrical Installations: up to Ø 90 mm, wall up to 8 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 89 mm, wall up to 6 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 89 mm, wall up to 8 mm
- Furniture Tubes: up to Ø 89 mm, wall up to 10 mm
- FE Boiler Pipes: up to Ø 89 mm, wall up to 8 mm
- Aluminium Pipes: up to Ø 89 mm, wall up to 10 mm
- Gas Pipes UNI 5745: up to 3″, standard wall
- Square Tubes: up to 70 × 70 mm, wall up to 5 mm
CBC UNI 90
Electro-Hydraulic Mandrel Bender
electric with mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 90 mm, wall up to 3 mm
- Steel Pipes for Electrical Installations: up to Ø 90 mm, wall up to 2 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 80 mm, wall up to 3 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 90 mm, wall up to 3 mm
- Furniture Tubes: up to Ø 90 mm, wall up to 2 mm
- FE Boiler Pipes: up to Ø 90 mm, wall up to 2 mm
- Aluminium Pipes: up to Ø 90 mm, wall up to 4 mm
- Gas Pipes UNI 5745: up to 3″, wall up to 3 mm
- Square Tubes: up to 70 × 70 mm, wall up to 3 mm
CBC UNI 120
Digital Pipe Bending Machine
electric without mandrel program memory / series work
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 139.7 mm, wall up to 8 mm
- Steel Pipes for Electrical Installations: up to Ø 114.3 mm, wall up to 8 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 114.3 mm, wall up to 6 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 114.3 mm, wall up to 8 mm
- Furniture Tubes: up to Ø 114.3 mm, wall up to 10 mm
- FE Boiler Pipes: up to Ø 114.3 mm, wall up to 8 mm
- Aluminium Pipes: up to Ø 139.7 mm, wall up to 9 mm
- Gas Pipes UNI 5745: up to 4″, wall up to 8 mm
- Square Tubes: up to 90 × 90 mm, wall up to 10 mm
CBC Minicalandra
Mini Ring Rolling Machine
by hand electric without mandrel
Mechanical Digital, 230 V
- Hard and Soft Copper Pipes, Annealed Brass Pipes: up to Ø 22 mm, wall up to 3 mm
- Stainless Steel AISI 304/316 Pipes: up to Ø 16 mm, wall up to 2 mm
- Hydraulic Steel Pipes St 35.4: up to Ø 22 mm, wall up to 3 mm
River Amica 3
Lever Pipe Bender for Pipes from Coils
by hand without mandrel portable
- Annealed copper pipes, bare or coated: Ø 10–22 mm
- Multilayer pipes: Ø 26 and 32 mm
River Girella
Lever Pipe Bender for Copper
by hand without mandrel portable
Girella · Ø 10–16 mm Girella · Ø 6–16 mm
- Annealed Copper Pipes: Ø 10–16 mm – Girella · Ø 10–16 mm
- Hard copper in bars: Ø 10–14 mm – Girella · Ø 10–16 mm
- PVC-coated pipes: Ø 10–14 mm – Girella · Ø 10–16 mm
- Annealed Copper Pipes: Ø 6–16 mm – Girella · Ø 6–16 mm
- Hard copper in bars: Ø 6–14 mm – Girella · Ø 6–16 mm
- PVC-coated pipes: Ø 6–14 mm – Girella · Ø 6–16 mm
River N. 78 – GM 600
Hydraulic Pipe Bender with Hand Pump
by hand without mandrel
N. 78 N. 30 N. 32 GM 300 GM 400 GM 500 GM 600
- Steel gas pipes: 3/8″ to 1″1/2 – N. 78
- Steel gas pipes: 3/8″ to 2″ – N. 30
- Steel gas pipes: 3/8″ to 2″1/2 – N. 32
- Steel gas pipes: 3/8″ to 3″ – GM 300
- Steel gas pipes: 1″ to 4″ – GM 400
- Steel gas pipes: 1″1/2 to 5″ – GM 500
- Steel gas pipes: 1″1/2 to 6″ – GM 600
River M116 – GME 600
Electro-Hydraulic Pipe Bender
electric without mandrel
M116 M116B M60 M60B M64 GME 300 GME 400 GME 500 GME 600
- Steel gas pipes: 3/8″ to 1″1/2 – M116, M116B
- Steel gas pipes: 3/8″ to 2″ – M60, M60B
- Steel gas pipes: 3/8″ to 2″1/2 – M64
- Steel gas pipes: 3/8″ to 3″ – GME 300
- Steel gas pipes: 1″ to 4″ – GME 400
- Steel gas pipes: 1″1/2 to 5″ – GME 500
- Steel gas pipes: 1″1/2 to 6″ – GME 600
Mingori OB 30 simple flasque
Hydraulic Pipe Bender without Upper Flange
by hand without mandrel
- Pipes (nominal size): 3/8″ to 1″1/4
Mingori 180° Pipe Benders
Pipe Bending to 180°
by hand electric without mandrel
OB 30 180° OBM 60 180° OB 40 180° OBM 140 180°
- Pipes (nominal size): 3/8″ to 2″ – OB 30 180°, OBM 60 180°
- Pipes (nominal size): 3/8″ to 3″ – OB 40 180°, OBM 140 180°
Mingori OBME 150
Hydraulic Pipe Bender with Petrol Engine
petrol engine without mandrel
- Steel gas pipes: 2″ to 4″
- API and ASA pipes: 2″ to 4″
- PE-coated pipes: 2″ to 4″
- Boiler pipes: Ø 60.3–114.3 mm
- Hydraulic pipes: Ø 60.3–114.3 mm
- Thick-walled aluminium pipes: Ø 60.3–114.3 mm
- Thick-walled copper pipes: Ø 60.3–114.3 mm
Mingori Petroleum Type
Pipe Bender for Large Pipes
by hand electric petrol engine without mandrel
OB 50 P OBMP 150 OBMEP 150
- API and ASA pipes: 4″ to 8″
- PE-coated pipes: 4″ to 8″
Mingori SUPER MP 150 / MEP 150
Pipe Bender for Pipes up to 16″
electric petrol engine without mandrel
SUPER MEP 150 SUPER MP 150
- API and ASA pipes: 4″ to 16″
Mingori GS 30 / GS 60
Rotary Draw Pipe Bender
by hand electric with and without mandrel
GS 30 GS 60
- Steel tubes: up to Ø 40 mm
- Stainless steel tubes: up to Ø 40 mm
- Aluminium tubes: up to Ø 40 mm
- Copper tubes: up to Ø 40 mm
- Copper alloy tubes: up to Ø 40 mm
Mingori GS de Production
Electric Tube Bender for the Workshop
electric without mandrel program memory / series work
- Steel tubes: up to Ø 40 mm
- Stainless steel tubes: up to Ø 40 mm
- Aluminium tubes: up to Ø 40 mm
- Copper tubes: up to Ø 40 mm
- Copper alloy tubes: up to Ø 40 mm
Mingori Multiplan Type 30 / 35
Rotary Draw Tube Bender for Series Work
by hand electric with and without mandrel program memory / series work
Type 30 Type 35
- Steel tubes: up to Ø 30 mm – Type 30
- Stainless steel tubes: up to Ø 26.9 mm – Type 30
- Aluminium tubes: up to Ø 40 mm
- Copper tubes: up to Ø 54 mm
- Square steel tubes: up to 20 × 20 mm – Type 30
- Square stainless steel tubes: up to 16 × 16 mm – Type 30
- Square aluminium tubes: up to 25 × 25 mm – Type 30
- Square copper tubes: up to 30 × 30 mm – Type 30
- Steel tubes: up to Ø 35 mm – Type 35
- Stainless steel tubes: up to Ø 33.7 mm – Type 35
- Square steel tubes: up to 25 × 25 mm – Type 35
- Square stainless steel tubes: up to 25 × 25 mm – Type 35
- Square aluminium tubes: up to 30 × 30 mm – Type 35
- Square copper tubes: up to 35 × 35 mm – Type 35
Mingori VOS / VOMS
Rotary Draw Pipe Bender with Oscillating Cylinder
by hand electric with and without mandrel
VOS 102 VOMS 204 VOS 40 VOMS 140
- Stainless steel tubes: Ø 10–60 mm, wall 1–3.2 mm, without mandrel – VOS 102, VOMS 204
- Stainless steel tubes: Ø 10–60 mm, wall 0.8–4 mm, with mandrel – VOS 102, VOMS 204
- Aluminium tubes: Ø 10–60 mm, wall 1–3.2 mm, without mandrel – VOS 102, VOMS 204
- Aluminium tubes: Ø 10–60 mm, wall 0.8–4 mm, with mandrel – VOS 102, VOMS 204
- Copper tubes: Ø 10–60 mm, wall 1–3.2 mm, without mandrel – VOS 102, VOMS 204
- Copper tubes: Ø 10–60 mm, wall 0.8–4 mm, with mandrel – VOS 102, VOMS 204
- Brass tubes: Ø 10–60 mm, wall 1–3.2 mm, without mandrel – VOS 102, VOMS 204
- Brass tubes: Ø 10–60 mm, wall 0.8–4 mm, with mandrel – VOS 102, VOMS 204
- Steel tubes for construction, heating and thin-walled hydraulics: Ø 10–60 mm, wall 1–3.2 mm, without mandrel – VOS 102, VOMS 204
- Steel tubes for construction, heating and thin-walled hydraulics: Ø 10–60 mm, wall 0.8–4 mm, with mandrel – VOS 102, VOMS 204
- Square tubes: side length 20–50 mm, wall 1–3.2 mm, without mandrel – VOS 102, VOMS 204
- Stainless steel tubes: Ø 10–80 mm, wall 1–3.2 mm, without mandrel – VOS 40, VOMS 140
- Stainless steel tubes: Ø 10–80 mm, wall 0.8–4 mm, with mandrel – VOS 40, VOMS 140
- Aluminium tubes: Ø 10–80 mm, wall 1–3.2 mm, without mandrel – VOS 40, VOMS 140
- Aluminium tubes: Ø 10–80 mm, wall 0.8–4 mm, with mandrel – VOS 40, VOMS 140
- Copper tubes: Ø 10–80 mm, wall 1–3.2 mm, without mandrel – VOS 40, VOMS 140
- Copper tubes: Ø 10–80 mm, wall 0.8–4 mm, with mandrel – VOS 40, VOMS 140
- Brass tubes: Ø 10–80 mm, wall 1–3.2 mm, without mandrel – VOS 40, VOMS 140
- Brass tubes: Ø 10–80 mm, wall 0.8–4 mm, with mandrel – VOS 40, VOMS 140
- Steel tubes for construction, heating and thin-walled hydraulics: Ø 10–80 mm, wall 1–3.2 mm, without mandrel – VOS 40, VOMS 140
- Steel tubes for construction, heating and thin-walled hydraulics: Ø 10–80 mm, wall 0.8–4 mm, with mandrel – VOS 40, VOMS 140
- Square tubes: side length 20–60 mm, wall 1–3.2 mm, without mandrel – VOS 40, VOMS 140
How to read the results
The finder compares your pipe with the maximum capacities that CBC, River and Mingori state for each pipe material: the largest outside diameter and, where the manufacturer gives it, the wall thickness; where no wall thickness is stated, it is not checked. Gas pipes and API/ASA pipes are selected by their nominal size in inches. If you enter the outside diameter in inches, it is converted into millimetres.
Whether a bend succeeds also depends on the bending radius and on a bending former that matches your pipe exactly. Each product page lists the formers that are available and the radii they produce.
More on choosing a machine:
- Choosing the right tube bending machine
- Pipe materials for tube bending – an overview
- The bending radius in tube bending – the ultimate guide
Not sure which machine is right? Send us your pipe dimensions and the bends you need – we will recommend a machine. Contact us